Constructive Description - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer

5. Constructive description

5.1. General
For a better representation of the components
we have dispensed with protective covers in
some cases.
Before taking the unit into
operation it has to be
ensured that all protective
covers, flaps or sheets have
been duly mounted. They
serve for the protection of
the staff, however, also for
the proper function of the
The PRESTO channel-type baling press has
been constructed for the compaction of soft
materials as paper, cardboard, foil, etc.
It is prohibited to load explosive or
assimilated materials or inflammable
materials (according to §1 SprengG).
When erecting the unit and taking it into
operation the guidelines of the water
household and environment protection law
have to be adhered to.
Materials that are subject to special conditions
for the disposal according to the waste disposal
law must not be loaded.
Furthermore it is prohibited to fill in rumble,
timber or other bar racks from metal or other
hard materials.
Danger!
machine.
04/2012 5 - 1
Glowing or burning particles must not be
loaded.
The channel-type baling press is controlled
by a stored program control (SPC). The
compaction of the material is effected by a
compressing die which is moved in the
pressing channel by means of a hydraulic
cylinder. According to the design the pressed
material is tied up to a bale automatically (V).
These operating instructions generally apply
for all machine types of the channel-type
baling press Conti-Compact CC-13, CC-20, CC-
30 and CC-40 V.
The above illustration only shows machine
type CC-20V.
In case of constructive deviations this is
stated extra. In order to simplify matters the
operating instructions refer to the channel-
type baling press.