PRESTO
GmbH & Co. KG
Bad Laer
3.6.4. Transport and loading
Use corresponding hoisting equipment and
proper securing measures:
Lift machine at intended loading point only
or use forks of forklift truck only at bearing
parts! See schematic view!
The forks only in places marked by the
Following sign set.
CC 13, Points of notice forks
CC 20, Points of notice forks
CC 36, Points of notice forks
Secure load against unintended changes of
the position.
Parts that are removed during transit have to
be mounted and fixed again before taking
the machine into operation again!
Transport safety devices and transport aids
have to be removed.
The machine has to be separated from every
external energy supply also in case of a slight
change of the location of the machine!
Before taking the machine into operation
again, the machine has to be connected to
the mains again properly!
04/2012 3 - 10