Insert Binding Wire Coils - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer

6.6 Insert binding wire coils

Inserting the lower wire
Loading the wire containers or the large roller stations with wire.
Master switch ON (13)
Selector switch to „Manual" (8)
Press Operation button (9). System is ready for operation.
Press Start button (1). Electrical motor and hydraulic pump (20) are running.
Pressing ram backwards (button 3b). Press and hold button "ram backwards". Ram
moves backwards until end position (B31) is reached and valve is closed.
Needle in threading position: Pressing ram must be completely retracted; press the
Needle down button (4b). Needle moves down and stops in
(only B34).
Pulling in the wire Straight align the wire and pull in.
Threading example for the lower wire for CCV
1 through the spring winding at the end of the press
2 through the drill bushes at the rear support legs
3 through the needle profile above the needle head
4 pull wire through to the end of the channel
Operating position
04/2012
Threading position
Threading position
6 - 16