Organisational Measures - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer
Safety switch (Type CC-30 only)
Cover, manual tie-off device
Safety switch needle flap

3.5. Organisational measures

3.5.1. General
The operating instructions always have to be
kept at the intended place.
In case of multiple shift operation it has to be
determined who will be responsible to carry
out the maintenance works.
Check machine with regard to external
recognisable and/or audible damage and
defects, at least once per shift. Stop and
secure machine immediately if necessary.
Before starting the work the operational
tests at the emergency-off switch and the
safety switch and light barriers if necessary.
ATTENTION!
Any work such as taking into operation,
maintenance and repairs may be performed
by qualified staff only and have to be
checked by responsible experts. The user has
to notify any trouble or irregularities to his
person in charge immediately. This applies
for the mechanical and electrical devices.
The machine has to be stopped and secured
immediately in case of malfunctions or
safety-relevant changes of the behaviour of
the machine. Malfunctions have to be
corrected immediately.
It has to be seen to it that the operating
instructions, the maintenance and special
tools and devices, the oil cans and grease
guns as well as cleaning agents and
lubricants belonging to the channel-type
baling press container are always kept in the
intended receptacles.
04/2012 3 - 5