Liability And Warranty; Product Liability; Warranty - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer
The use of flammable materials (e.g. petrol is
forbidden – BGV A1 § 43 and 44! During
cleaning work, repairs, etc. the main switch
(1) always has to be locked in 0-position with
a padlock.
Operating fuels (e.g. gear lubricant oil) during
maintenance, repair work and oil changes
have to be collected in appropriate vessels
and disposed of according to the regulations
(EC guideline 75/439/EEC and decrees, 5a, 5b
AbfG and AltölV).

3.8. Liability and warranty

The completeness of the scope of delivery
according to the delivery note has to be
checked upon receipt of the machine.
If parts are missing or transport damages are
found, please inform PRESTO GmbH & Co. KG
immediately.
The supplied unit has been constructed
according to the latest state of the art and
the accepted safety standards (DIN 12100
part 1 and 2 and DIN EN 60204 T1 and
DIN ISO 13849).
In case of improper use and non-compliance
with the regulations, dangers to life and limb
and trouble of the machine or other tangible
assets might occur.
The PRESTO channel-type baling press
primarily serves for the compaction of soft
materials as paper, cardboard, foil, etc.
Another or surpassing use may be regarded
as improper use. PRESTO GmbH & Co.KG will
not be liable for damages resulting from this.
The risk will solely be borne by the user of
the machine.
Operate unit in a technically good order and
according to the regulations.
This requires the adherence to the applicable
regulations of the accident prevention and
the accepted
technical regulations for safety and proper
working and the operating instructions,
inspection and maintenance regulations valid
in the country of the user and at the location.

3.9. Product liability

If non-compliance/non-adherence to the
regulations and instructions of this operating
manual leads to accidents with personal
injury or property damage, PRESTO GmbH &
Co.KG will not be liable for any
damage and the compensation of indirect
damage as injuries of persons, damage to
goods, which do not form the subject of the
contract, loss of profits and production
failure which will be directed to PRESTO
GmbH & Co.KG under the title
"PRODUCT LIABILITY".

3.10. Warranty

PRESTO will accept the warranty for the unit,
provided that the operating and
maintenance manual is adhered to.
04/2012 3 - 12
Modifications, extensions and
changes of the design of the
machine must not be made
without the approval of
PRESTO GmbH & Co.KG.