Safety - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer

3. Safety

3.1. General
To safeguard the labour protection and the
on-the-job safety the following references
have to be adhered to:
Accident prevention regulations, in
particular:
BGV A1 General Regulations
BGV A2 Electrical systems and
operating resources
BGV A5 First Aid
BGV B3 Noise
BGV A8 Safety marking at the work
site
have to be adhered to.
The accident prevention rules of the country
where the unit will be used have to be
observed.
We wish to point out that the unit has to be
checked at least twice a year by a qualified
person with respect to the proper and safe
function in correspondence with the above
mentioned directives.
In addition to the above mentioned
regulations the following directives are
appropriate for the inspection as well:
Safety of machinery DIN EN 12100
Electrical equipment DIN EN 60204
EC- machinery
directive
During the operation of the machine the
laws and regulations applicable at the place
of use have to be observed. For the sake of a
safe work sequence the operator,
supervisory persons and machine operators
are responsible for observing the regulations.
The channel-type baling press may only be
used as directed. An improper use can result
in personal and property damages.
The PRESTO channel-type baling press has
been constructed for the compaction of soft
materials as paper, cardboard, foils and
similar.
04/2012 3 - 1
Part 1 u. 2
2006/42 EG