Table of Contents
Advertisement
PRESTO
GmbH & Co. KG
Bad Laer
5.7.
Attachable funnel with safety
circuit
Attention, danger of
Do not climb or reach into
loading opening!
This assembly is responsible to observe the
minimum safety height of the loading opening
of 1100 mm above the loading level. The
attachable funnel becomes necessary, if the
channel-type baling press is loaded by means
of a ramp.
25
(A standard funnel with revision door (25) and
safety switch (S2) is shown.
crushing!
Danger!
S2
04/2012 5 - 11
The assembly mainly consists of the following
components
• Charging funnel with installation
material,
• Light barrier (see chapter 11 "Appendix,
special equipment")
• Safety switch.
PRESTO will adapt the attachable funnel to
the local conditions. As a rule the channel-
type baling press and the attachable funnel
have to be installed at the customer's
according to the enclosed project plans.
The installation of the funnel
may be carried out be
You will find further information in chapter
11, "Appendix / special equipment"
Attention!
specialists only!
Hide quick links:
Advertisement
Table of Contents
