Control And Program Description - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer
Control- and programdiscription
6.5
Main menu
Fig. 1: Main menu
Navigation and adjustments with Touch
Panel
With the button „Menu" in the starting
picture you get to the window „main menu".
In the main menu of the press different
menu entries can be chosen, e.g. show
„machine-data". Adjustments can be edited
after entering a password in the menu entry
„settings" (see "Settings").
Key assignment in main menu:
F1-> display help
F2-> user login
F3-> language choice
F4-> show message buffer
F5-> lamp test
F6-> standard picture press
Options
Fig. 2: Options
Pressing the button „Options" the window
will open. Additional control and display for
the control of the conveyor (if existent) can
be found here.
A pre-selector for the limit position
disconnection of the compactor decides
whether the ram stops in front or rear
position after pressing.
Machine Data
Fig. 3: Machine data
Following menu entries can be found in
„machine-data": bale counter, daily bale
counter and the graphics of the pressure at
the moment (shown in "bar"). The bale
counter indicates the total sum of wired
bales. The daily bale counter counts the
bales and can be reset to "0" after entering
the password.
04/2012 6 - 12