Introduction - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer

1 Introduction

1.1 Introduction
Dear customer,
to assure a safe and efficient use of the
unit we would ask you to read the present
operating instructions carefully prior to
the initial start-up.
The operating instructions contain all
relevant information for the operation and
maintenance of the channel-type baling
press.
Chapter 1 to 10 will inform you about the
standard equipment. If installed, the
special equipment will be dealt with in
chapter 11.
These operating instructions form a
constituent part of the complete
documentation for the channel-type
baling press of the types CC-13, CC-20, CC-
30 and CC 40.
Other essential parts are:
• Electrical and circuit diagrams,
• Assembly or layout diagram
• Declaration of Conformity or
alternatively Declaration of
Incorporation
In principle, every machine is supplied
with a Declaration of Conformity. This
states that the machine fulfils the basic
safety and health requirements of the EC
Directive on Machines.
In the event that no Declaration of
Conformity is issued, the attached EC
Declaration of Incorporation for
incomplete machines states with which
additional components the machine must
be assembled before it is put into
operation. Until the machine has been
completely assembled, commissioning of
individual components is forbidden.
As a rule all safety instructions have to be
fulfilled prior to the commissioning of the
channel-type baling press.
Only qualified and trained personnel of
PRESTO or persons authorised by them
may work with the channel-type baling
press.
If maintenance works are neglected or
carried out improperly we will not be able
to fulfil our guarantee obligations
according to our terms of delivery.
Only original-PRESTO- spare parts ensure
quality and interchangability.
How to identify your machine:
These operating instructions serve for the
operation and maintenance and apply for:
Project:
Type:
Mach.- No.:
04/2012 1-1
Channel-type baling press
______________________
(see type plate)
______________________
(see type plate)