Intended Use; Improper Use; Amendments At The Supplied Device By The Operator; Residual Risks At The Channel Type Baling Press - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer

2. Intended use

The channel-type baling press has been
constructed for the compaction of soft
materials as paper, cardboard, foils and
similar.

2.1. Improper use

Explosive materials or similar materials or
combustible materials may not be filled in.
It is also prohibited to charge rumble, wood,
form or bar racks from metal or other hard
materials, which can result in a jerky
jamming of the compressing die.
2.2. Amendments at the supplied device
by the operator
The declared conformity applies only to the
structural condition upon delivery of the
device in correspondence with the agreed
scope of delivery. Any installation or
equipment which is carried out by the
operator at a later time, however, has not
been developed or authorised by the
manufacturer of the machine, will result in
an expiry of the declared conformity.
This also includes unauthorised modifications
of the channel-type baling press with sheets,
wood, pasteboard or fabric of any kind by
the operator.
2.3. Residual risks at the channel-type
baling press
Danger by nonobservance of the
operating instructions
Danger by insufficient maintenance
and repair
Risks arising during maintenance,
servicing, and repair work through
the use of sharp-edged or
inappropriately compacted materials
(see note in chap. 7, Maintenance
and Inspection).
The operator is responsible for these residual
risks.
04/2012 2-1