Installing The Ln1000 Rear Transition Module - Juniper LN1000 User Manual

CHAPTER 7
Installing the LN1000 Rear Transition
Module

Installing the LN1000 Rear Transition Module

Installing the LN1000 Rear Transition Module on page 27
Installing an SFP Transceiver in an LN1000 RTM on page 28
Removing an SFP from an LN1000 RTM on page 30
Cabling the LN1000 Rear Transition Module on page 31
To install the LN1000 rear transition module into a VITA 46.0-compliant chassis:
Verify that you have taken the necessary antistatic precautions.
1.
On the back of the VITA 46.0-compliant chassis, choose an appropriate slot for the
2.
rear transition module.
The LN1000 rear transition module must be installed inline behind the designated
location where you plan to install the LN1000 router. For example, if the LN1000 router
is to be installed in slot 3, the rear transition module must be installed in the back of
the chassis in slot 3.
27