Ln1000 Rear Transition Module Overview; Ln1000 Rear Transition Module Description; Ln1000 Rear Transition Module Features; Ln1000 Rear Transition Module Backplane Connector - Juniper LN1000 User Manual

CHAPTER 2

LN1000 Rear Transition Module Overview

LN1000 Rear Transition Module Description

LN1000 Rear Transition Module Features

LN1000 Rear Transition Module Backplane Connector

LN1000 Rear Transition Module Description on page 9
LN1000 Rear Transition Module Features on page 9
The LN1000 rear transition module is a fully compatible, carrier-grade VITA
46.10-compliant I/O rear transition module for the LN1000 Mobile Secure Router. The
6 rack unit (6RU) form factor, single-slot rear transition module is fully compliant with
the PICMG 2.0 Revision 3.0 specification.
The LN1000 rear transition module requires an VITA 46.0-compliant chassis with a
midplane that accommodates front and rear board installations. The primary purpose
of this module is to provide rear access connections to the LN1000 router in a test or
repair environment.
LN1000 Rear Transition Module Backplane Connector on page 9
LN1000 Rear Transition Module Console Ports on page 10
IPMI Shelf Manager on page 11
LN1000 Rear Transition Module Ethernet Ports on page 11
LN1000 Rear Transition Module Switch Settings on page 11
The connector on the LN1000 rear transition module provides the ability to configure the
router. It also provides:
Console port access
IPMI signals
USB port access
Ethernet port access
9