LN1000 Mobile Secure Router
Tamper-Evident Seals
6
Four tamper-evident seals are affixed to the router to show evidence of tampering with
the router's internal components. Two small silver disks, which have two small holes in
them, are located over the top-left and bottom-right screws that hold the router assembly
together. Two larger, bright silver seals span the processor backer plate and primary side
cover.
WARNING:
If any of these seals are removed or peeled off the router, the
router's internal components can be exposed to electrostatic discharge
(ESD), compromising the integrity of the router, which voids the router's
warranty.
Figure 3: Tamper-Evident Seals
Tamper-evident seals
An ESD warning label is located on the back of the router.