Inspecting The Hardware - Juniper LN1000 User Manual

LN1000 Mobile Secure Router

Inspecting the Hardware

Related
Documentation
If You Detect or Suspect Damage
Related
Documentation
22
To unpack the LN1000 rear transition module:
Open the outer box from the top.
1.
Remove the accessories from the box.
2.
The accessories are located between the outer box and the inner box that contains
the LN1000 rear transition module. Accessories include an RJ-45-to-DB-9 adapter.
Remove the inner box that contains the LN1000 rear transition module.
3.
Remove the LN1000 rear transition module from the box and place it in the location
4.
you selected.
After you remove the equipment from the shipping container:
Confirm the contents of the container.
Inspect all external surfaces and external connectors for visible signs of damage.
Inspect all accessories shipped with each unit.
Document any damage noted during your inspection.
If You Detect or Suspect Damage on page 22
Before You Install the LN1000 Router on page 23
Unpacking the LN1000 Router on page 21
If you detect or suspect damage to any equipment:
Contact the shipper responsible for delivery, and formally report the damage.
Contact your Juniper Networks sales representative or reseller at
http://www.juniper.net/in/en/contact-us/
Information You Might Need to Supply to JTAC on page 45
Before You Install the LN1000 Router on page 23
Unpacking the LN1000 Router on page 21
.