3.3 Swiveling up the machine head
The machine head can be swiveled up for maintenance work. This requires
that the transport carriage be in its rear position.
Fig. 2: Swiveling up the machine head (1)
(1) - Hood
(2) - Head cover
To swivel up the machine head:
1. Remove the hood (1).
2. Pull the handle of the folding station up.
3. Swivel the folding station out by 90°.
4. Swivel the locking lever (3) up.
14
WARNING
Risk of injury from moving parts!
Crushing possible.
Do not reach into the tabletop cutout when the
machine head is swiveled up.
①
To do so, lift the hood (1) up at the front to release the lock. Carefully life
the hood (1) up and off.
③
②
(3) - Locking lever
Service Instructions 745-35-10 D - 00.0 - 10/2017
Machine head