Middle Knife; Disassembling The Drive Motor - DURKOPP ADLER 745-35-10 D Service Instructions Manual

3.10 Middle knife

3.10.1 Disassembling the drive motor

Fig. 46: Disassembling the drive motor
(1) - Eccentric
(2) - Motor fastening screws
(3) - Drive motor
To remove the drive motor:
1. Loosen the electrical connection on the motor by disconnecting
2. Loosen the screw (5) of the cover.
3. Pull the cover off carefully.
4. Loosen the screws on the eccentric (1).
5. Unscrew the motor fastening screws (2).
6. Pull the drive motor (3) out of the eccentric (1) towards the rear.
56
WARNING
Risk of injury from cutting and moving parts!
Cutting and crushing possible.
Switch off the machine before adjusting the middle
knife settings.
① ② ③
the plug between cable harness and motor cable.
⑤
④ ②
(4) - Cap
(5) - Screw
Service Instructions 745-35-10 D - 00.0 - 10/2017
Machine head