Light barriers
8
8.1 Setting the swivel arm
Fig. 95: Setting the swivel arm
(1) - Swivel arm
(2) - Screw with counternut
Proper setting
The swivel arm (1) should stand in parallel position to the machine arm.
When swiveling in front of the arm, make sure the arm snaps securely into
place.
To set the swivel arm:
1. Swing out the swivel arm (1) with the light barriers.
2. Swing the swivel arm (1) back and check the pressure of the locking
3. Check the position of the swivel arm (1) in relation to the machine head.
4. Loosen the counternut (4).
Service Instructions 745-35-10 D - 00.0 - 10/2017
Light barriers
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the light
barriers.
①
screw (3).
(3) - Locking screw
(4) - Counternut
④
③
②
105