Replacing Corner Knives - DURKOPP ADLER 745-35-10 D Service Instructions Manual

6.6 Replacing corner knives

Information
Blunt knives need to be replaced with a set of knives included in the
accessory pack.
Replacement corner knives can be ordered under the part numbers given
in the parts list.
Fig. 90: Replacing corner knives (shown on straight pocket)
(1) - Piercer
(2) - Corner knife
(3) - Corner knife holder
To replace the corner knives:
1. Swivel out the corner knife station.
2. Remove the piercer (1) (for straight pocket only).
3. Loosen the screw (4).
4. Remove the old corner knife.
5. Insert a new corner knife (2) into the corner knife holder (3).
6. Tighten the screw (4).
7. Insert the piecer (1) again.
 The tip of the knives has to be below the piercer (1).
8. Swivel in the corner knife station.
100
①
②
③
④
(4) - Screw
(5) - Screws of the piercer
Service Instructions 745-35-10 D - 00.0 - 10/2017
Corner knife
⑤