12.2 Aligning the folder with the middle of the pocket opening
Fig. 111: Aligning the folder (1)
(1) - Edge of the sliding plate
(2) - Middle of the pocket opening
Proper setting
If properly fitted, the folder can be aligned with the middle of the pocket
opening (2) from the edge of the sliding plate (1).
Dimension x can be calculated based on the width of the folder sole (3).
This dimension can be used to align the folder with the middle of the pocket
opening (2) and parallel to the edge of the sliding plate (1).
Deduct piping width a and half of the needle distance NA from the
dimension 100 mm.
Example (diagram above):
100 mm - a - 1/2 x NA = x
100 mm - 5 mm - 1/2 x 12 mm = 89 mm
Check the distance of the folder sole (3) to the edge of the sliding plate (1).
Dimension A
124
①
(measuring line)
NA
a
10
4
12
5
14
6
16
6.5
(3) - Folder sole
Service Instructions 745-35-10 D - 00.0 - 10/2017
Folder
③
②