3. Prepare a workpiece and sew:
This makes the corner knife cuts more visible.
6.3 Checking the corner knife station
Fig. 82: Checking the corner knife station
(1) - Corner knife support
(2) - Corner knife
(3) - Corner knife
94
• Create a seam program for testing and set all corrections for the
corner knives and the middle knife to 0.
• Iron a piece of Vlieseline onto the workpiece.
• Sew a test seam.
• Check seam and cutting pattern.
• Repeat the process until the desired result has been achieved.
• To quit the test program, press the button
WARNING
Risk of injury from sharp parts!
Cutting injuries may be sustained.
Do NOT reach into the area of the corner knives.
①
or
②
(4) - Corner knife
(5) - Corner knife
(6) - Corner knife support
Service Instructions 745-35-10 D - 00.0 - 10/2017
Corner knife
.