Corner Knife; Setting The Initial Position Of The Corner Knives - DURKOPP ADLER 745-35-10 D Service Instructions Manual

Corner knife

6

6.1 Setting the initial position of the corner knives

Fig. 78: Setting the initial position of the corner knives
(1) - Corner knife
(2) - Screw
Information
To precisely set the position of the corner knives (1), start by bringing all
four corner knives to a initial position.
To set the initial position of the corner knives:
1. Loosen the screw (2).
2. Turn the corner knife holders (4) in such a way that the face sides (3)
3. Tighten the screw (2).
4. Set the other knife holders as described above.
Service Instructions 745-35-10 D - 00.0 - 10/2017
Corner knife
WARNING
Risk of injury from sharp parts!
Cutting injuries may be sustained.
NEVER reach into the area of the corner knives.
Set the corner knives only with utmost caution and
with the machine switched on.
①
②
are in front of each other.
(3) - Face side
(4) - Corner knife holder
④
③
91