Invacare® Robin®
3 Service
3.1 Installing the ceiling hoist to the rail system
Robin®requires a trolley, guiding the ceiling hoist in the rail
system. Robin® Moverhas the trolley built-in and can be
installed directly to the rail system.
3.1.1 Installing Robin®
Tools: 4 mm Allen key; 17 mm socket wrench
8
1. To install the trolley, remove the end stop that is
attached to the rail system.
In some countries/ local areas, there is a
demand for double securing of the end stops. If
an extra securing screw is installed, remove this
screw before.
2. Insert the trolley into the rail (no matter which way, as
the trolley is symmetric).
3. Re-insert the end stop.
In some countries/ local areas, there is a demand
for double securing of the end stops. If an extra
securing screw is required, install this screw. See
also End Stop.
1586747-C