Table of Contents
Advertisement
Mechanical mounting
5.1
Safety instructions
Safety measures for electromagnetic and permanent-magnetic fields
Note
Only qualified, suitably trained personnel who clearly understand the special hazards
involved may work with and on permanent-magnet rotor cores.
Note
Apply safety marking in accordance with the country-specific regulations at the assembly
stations for rotor cores.
● Observe the relevant nationally applicable health and safety regulations.
● Take measures, e.g. using shields, to reduce electromagnetic fields at their source.
● Keep the motor components in their original packaging until installation.
● Mark the storage location with the symbol for magnetic danger.
● Place the unpacked rotor core in a safe place. Secure the rotor core with non-magnetic
devices.
● Avoid contact of the rotor core with ferromagnetic bodies.
● Preferably use tools made of non-magnetic materials. Ferromagnetic assembly tools
must have low mass. Work carefully!
Attaching warning signs
Any danger areas encountered during normal operation, maintenance, and servicing must
be identified by well visible warning and prohibition signs (pictograms) in the immediate
vicinity of the danger.
The associated texts must be provided in the language of the country in which the product is
used.
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
5
51
Advertisement
Table of Contents
