Table of Contents
Advertisement
Operation
8.1
Safety instructions
Danger to life caused by machine movement and loose objects
Machine movement and loose objects that can fall out or be ejected can cause death or
severe injury.
• Ensure that the machine has been completely installed and all of the setting work
• Ensure that nobody is at risk at switch on.
• Before switching on, check that there are no loose objects in or on the motor that can
• Before switching on, check that all safety guard covers are installed and all safety
Danger to life caused by a rotating rotor or ejected parts
Rotating rotors and the resulting ejected parts can cause death or injury.
• Secure rotating output elements using the appropriate safety guards.
• Secure loose parts, e.g. featherkeys to prevent the ejection.
Danger to life when the forced ventilation of the motor draws in hair and articles of clothing
Hair, ties or loose objects sucked into the air inlet can cause death or severe injury.
• Secure hair, ties and loose objects from being sucked in.
Danger to life when the cooling system bursts
The motor will overheat if it is operated without cooling. When cooling water enters the hot
motor, this immediately and suddenly generates hot steam that escapes under high
pressure. This can cause the cooling water system to burst, resulting in death, severe injury
and material damage.
• Never operate the motor without cooling.
• Only commission the cooling water circuit when the motor is in a cool condition.
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
WARNING
completed.
fall or be flung off.
equipment functions correctly.
WARNING
WARNING
WARNING
8
129
Advertisement
Table of Contents
