Transportation And Storage - Siemens Simotics M-1FE1 Series Hardware Installation Manual

4.3

Transportation and storage

Transport and store the built-in motors in the original packaging.
Transporting
Note
Observe the country-specific regulations.
● Fasten the load suspension device to the provided locations of the packaging or the
motor.
● Transport the motor carefully.
● Avoid any jerky and oscillating movements during transport.
If a motor is not installed immediately after the delivery, it must be stored appropriately.
Observe the following storage conditions.
Storage
Storage conditions
Store the motor in a dry, dust-free and vibration-free indoor storage facility.
Adhere to the following values:
● v
● Max. temperatures: -15° C ... 70° C
● Relative humidity: 5% ... 85%
Identification of the storage location
Mark the storage location clearly with warning notices as per the packaging of the built-in
motors.
Note
This identification must also be visible after removal of the external packaging.
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
< 0.2 mm/s
rms
Preparing for use
4.3 Transportation and storage
47