Decommissioning - Siemens Simotics M-1FE1 Series Hardware Installation Manual

Decommissioning and disposal

10.2 Decommissioning

10.2 Decommissioning
Removing the motor
The motor must only be removed by qualified personnel with the appropriate technical know-
how.
Contact a certified waste disposal organization in your vicinity.
Procedure
1. Disconnect all of the electrical connections
2. Remove all liquids such as oil, water.
3. Release all of the supply lines
4. Remove all cables.
5. Remove the fixing elements from the motor.
6. Transport the motor to a suitable location for storage.
Refer also to the information in the section headed "Maintenance (Page 137)".
You have removed the motor.
Note
Dismantling the motor
The motor must be dismantled by an authorized company or the manufacturer.
140
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b