Mechanical mounting
5.5 Mounting the motor spindle
5.5
Mounting the motor spindle
5.5.1
Preparation
Stator core with spindle enclosure and spindle shaft with rotor core are mounted to form a
complete motor spindle.
Production equipment and other resources required
● Hoisting gear with suitable load suspension device
● Eyebolts
● Centering assembly fixture
● Assembly film (only for APM rotors)
● Personnel protective equipment
5.5.2
Acting magnetic forces
The higher magnetic forces present as a result of the permanent magnets in the rotor can
draw the spindle into the stator bore.
①
②
F
a
F
r
Figure 5-16
The magnitude of the present magnetic forces is motor-specific.
86
Spindle shaft with rotor core
Stator core with spindle housing
Axial attractive force
Radial attractive force
Attractive_forces_motor_spindle
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b