Grounding - Siemens Simotics M-1FE1 Series Hardware Installation Manual

1
2
3
4
5
6
7
8
9
Figure 6-3
Note
Connect a rotary encoder according to the project requirements.
6.2.9

Grounding

Ground the 1FE1 according to the project requirements.
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
Power cable
Signal line, trailable or only conditionally trailable
Signal connector, 17 pole, external thread, MLFB 6FX2003-1CF17
Optional assembly flange for retrofitting MLFB 6FX2003-7DX00
DRIVE-CLiQ cable 6FX☐002-2DC10_☐☐☐, trailable or only conditionally trailable
SME120, encoder, motor side, connector kits 6FX2003-0SA12, 12-pin
Encoder
Temperature sensor (+1 reserve)
Ground connection
Voltage limiting (VPM, IVP), only if EMF > 820 V
Circuit diagram with SINAMICS (example)
Connecting
6.2 Electrical connection
109