Table of Contents
Advertisement
5.2
Mounting instructions
The mounting instructions in the following chapters are recommendations.
The spindle manufacturer can specify different actions, and tools and resources needed for
mounting.
Tools and resources needed for mounting are not included in the scope of delivery. The
spindle manufacturer is responsible for their provision.
To mount/dismantle the motor parts, ensure the following ambient conditions:
● A draught-free room
● Technically dust-free and dry environment. The permissible relative air humidity lies
within the range 5% to 85%.
● The occupational safety equipment required is specified in the appropriate work stages.
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
NOTICE
Danger of damage to the rotor banding
APM rotors have a banding (composite fiber) around the external diameter of the rotor
that must not be damaged.
• Keep the protective film until mounting the rotor.
• Remove the protective film only for balancing or immediately before mounting.
• Check the banding for damage before mounting.
• Mount the APM rotor centered in the spindle box using a mounting device.
• Use an assembly film.
Mechanical mounting
5.2 Mounting instructions
55
Advertisement
Table of Contents
