Installer Manual Foleo - Troubleshooting
9.
Troubleshooting
9.1.
Controller
9.1.1. Alarm detection
If an error in valve or controller function occurs, an alarm will sound and the home screen will display
the error alert button
Press the alarm button
Press the error alert button
If the display is in sleep mode when an error occurs, the screen will turn on for five minutes. The
controller will beep once every 10 seconds until the error is cleared. If the error is not cleared after
five minutes, the screen will switch to power saving mode and display the error alert button as a
screen saver.
9.1.2. Alarm alerts
NOTE
An error alert appears on the home screen if an error condition is detected. Press the error
alert button
NOTE
Most error alerts are cleared at regeneration. If the error persists following a regeneration
attempt the appropriate reset and recovery procedure below or contact technical support.
94 / 112
and the alarm button
Water treatment
wed
12:01 am
treatment
rapid rinse
backwash
to mute the alarm.
to view information about the error.
to view the error message.
.
2 d
tank refill
pause
draw
Ref. MKT-IM-038 / C - 15.11.2019