Master Setting Programming; Format Screen - Pentair FOLEO 5800 XTR Installer Manual

Installer Manual Foleo - Programming
5.4.

Master setting programming

NOTE

If a regeneration is scheduled to occur while in master settings, the scheduled regeneration
will start as soon as exiting the master setting.
NOTE

Due to the complexity of these settings and the potential for errors, master settings should
only be accessed by your local water professional.
CAUTION
Improperly adjusting master settings may cause the system to operate incorrectly. Before
entering master settings please contact your professional water supplier.
The following is a detailed overview of settings available in Master Settings. Please see 5.4.1. Format
screen, page 52 for the complete set of values and ranges available to program while in master
settings.

5.4.1. Format screen

From the master settings screen press the format button to display the format screen.
language: Displays the language used on the controller: English, French, German, Italian, Spanish,
Dutch or Portuguese.
units: Contains settings for the unit type (either US or Metric) to be used in the controller.
hardness units: Contains settings for hardness units of measure (grains per gallon, mg/L or ppm,
German degrees, French degrees, or Clark degrees).
NOTE

Hardness units are adjustable only if metric units are selected.
52 / 112

Format
language
units
hardness units
english
metric
mg/L
Ref. MKT-IM-038 / C - 15.11.2019