Settings Screen - Pentair FOLEO 5800 XTR Installer Manual

Installer Manual Foleo - Programming
NOTE

If no assistance name and phone as been set, "for service or assistance: please contact your
local water professional" will be displayed.
NOTE

The Assistance screen is also displayed automatically when the system reaches the
programmed assistance interval.

5.3.7. Settings screen

The settings screen allows you to change basic controller settings including time of regeneration and
water hardness. These settings improve the operational efficiency of the system and can be adjusted
independently from other controller settings without needing to enter master settings.
NOTE

Settings can not be accessed during a regeneration. If a regeneration has to start while in
the settings menu, it will not start until exit the menu.
From the home screen, press the settings button
Press day override/time-driven and use the arrows
regeneration in which a new regeneration will automatically be run whether one is scheduled or not.
Press regen. time and use the arrows
cycle will begin.
Press hardness and use the arrows
the hardness of the incoming untreated water supply.
48 / 112
to access the settings screen.
Settings
day override/
time-driven
regen. time
300 mg/L
hardness
to adjust the time of day when an automatic regeneration
to adjust the hardness setting. This value should match
1 d
02:00 am
to adjust the number of days since last
Ref. MKT-IM-038 / C - 15.11.2019