Pentair FOLEO 5800 XTR Installer Manual page 91

8.5.7.7 Encoding wheel cleaning
No.
A Remove the optical sensor, see 8.5.7.3 BLFC cleaning, page 86.
B Remove the plate (7) by pushing the 4 clips (1).
C Remove and clean the encoding wheel (6).
Eventually, removing the encoding wheel will cause the brine cam (3) and the gearbox
D output wheel (5) to fall. Remount starting with the brine cam (3), aligning the positioning
holes (4) with the backplate hole (2).
E Reverse above procedure steps to rebuild.
Ref. MKT-IM-038 / C - 15.11.2019
Installer Manual Foleo - Maintenance
Operation
91 / 112