Settings Review - Pentair FOLEO 5800 XTR Installer Manual

Installer Manual Foleo - Programming
continuous flow detect: Set to on. Triggers an alarm when continuous flow smaller than 0.5 gpm or
1 Lpm is detected by the flow meter over a 8 hours period.
Press to save and to return to the master settings screen or press
settings screen without saving.

5.4.7. Settings review

From the master settings screen press the settings review button to display the settings review
screen, which display a read-only summary of all programmed settings in the controller.
Use the navigation arrows at the top of the screen to scroll through the parameters currently set in
the controller. The settings review screens are formatted similarly to the corresponding screen
where each parameter was set.
Press to return to master settings.
60 / 112
Continuous Flow Detect
continuous
flow detect
flow rate
duration
Format
language
units
hardness units
on
1.0
Lpm
8 h
to return to the master
english
metric
mg/L
Ref. MKT-IM-038 / C - 15.11.2019