Pentair FOLEO 5800 XTR Installer Manual page 88

Installer Manual Foleo - Maintenance
8.5.7.5 Power head disassembly/replacement
No.
Remove the softener cover, see 8.5.1. First steps, page 76 and 8.5.2. Softener cover
A
removal, page 77.
B Using a 6 mm wrench or flat screwdriver, unscrew (2).
C Using a 8 mm wrench or flat screwdriver, unscrew (1).
D Separate the power head (3) from the valve body (4).
E Change the power head (3).
F Reverse above procedure steps to rebuild.
CAUTION
When assembling the gearing system (3) on the valve body (4), make sure to put the
brighter part of the piston axe (5) on the left when looking at the valve from behind as
shown.
TIP

These operations need to be performed before any cleaning or maintenance procedure.
88 / 112

Operation
Ref. MKT-IM-038 / C - 15.11.2019