Non-Factory Setting; Diagnostics - Pentair FOLEO 5800 XTR Installer Manual

5.4.11. Non-factory setting

After all parameters in master setting have been set, press
display the non-factory settings screen.
Press to save all programmed master settings parameters to non-factory settings. At any point,
the controller can be reset to these saved custom settings (see 5.5.1. Error log, page 65). Press
return to the master settings screen without saving.
NOTE

By performing a non-factory reset, any setting that is subsequently programmed without
saving to non-factory settings will be reset to the previously saved non-factory settings in
the controller.
5.5.

Diagnostics

The controller records and displays a variety of diagnostic data to assist with troubleshooting
performance issues and fine-tuning system efficiency.
From the master settings or home screens, press the diagnostics button
screen.
Ref. MKT-IM-038 / C - 15.11.2019
Non-factory settings
current settings will
be saved as
the non-factory settings?
Diagnostics
flow rate
peak flow
totalizer
Installer Manual Foleo - Programming
on the master settings screen to
to access the diagnostics
5.7
Lpm
9.2
Lpm
153
L
to
63 / 112