Touchscreen Controller Quick Start - Pentair FOLEO 5800 XTR Installer Manual

Installer Manual Foleo - Programming
Screen name Parameters
Setting
review
Water Saver Water saver
Regen regen.
Remote
Remote
signal
regeneration
duration
Cl generation
Low salt
Cl generation
Low salt
Regen
interval
5.3.

Touchscreen controller quick start

NOTE

Press on any quick start screen to reset the screen back to its default settings, excepted
on the "Assistance interval" screen.
NOTE

Steps 5.3.2. and 5.3.3. are optional and are not required to start the system. All controller
settings may be changed after the unit is in service.
NOTE

If the screen is blank after plugging in the unit, touch the screen to turn the screen on.
44 / 112
Values
Displays a summary of all programmed settings.
Off
Off
/ On
1 - 255
Regeneration
Notes
Chlorine generation together with low salt
detection will be performed during brine draw
cycle.
This parameter determines the regeneration
frequency on which there will be chlorine
generation.
Low salt detection will be performed during
regenerations indifferently of the frequency
set for cl generation.
Salt alarm will not avoid scheduled
regenerations to be performed.
To be programmed upon local regulation and
inlet water quality. In case no information is
available, it is advised to set "Regen interval"
at 4.
If bacterial growth issue is however noticed,
reduce the interval.
Ref. MKT-IM-038 / C - 15.11.2019