Touchscreen Control Features - Pentair INTELLIWATER PNR-POE1-XTR3-01 Installation And Operation Manual

TOUCHSCREEN CONTROL FEATURES

BUTTON AND SYMBOLS
Notice
Not all buttons appear on all screens.
REGENERATION CYCLE WHEEL
Displays the regeneration cycle step the system is currently in. The wheel rotates with each step so that the current step is
shown in green.
Notice
On metered units, the "Treatment" step on the Regeneration Cycle Wheel will flash when water is flowing through the unit.
Home: Displays the Home screen.
Regeneration: Displays the Regeneration screen, which allows you to start a regeneration and manually cycle through the
regeneration steps.
Settings: Displays the Settings screen, which allows you to adjust commonly used settings. Pressing this button while in
the Settings screen provides access to the Master Settings screen, which allows you to fully program the valve.
Notice
Due to the complexity of these settings and the potential for errors, Master Settings should only be accessed by your local
water professional.
Diagnostics: Displays the Diagnostic screen, which can assist in performing maintenance and troubleshooting
performance issues with the valve.
Brightness/Sound: Displays the Brightness/Sound screen, which allows you to adjust the backlight of the control screen
and allows you to mute the alarms of the control.
12 • PENTAIR INTELLIWATER CONNECTED WATER SOFTENER