Installing The Switch In A 19-Inch Rack; Installation Methods - H3C S5800 Series Installation Manual

Installing the switch in a 19-inch rack

Installation methods

You can install the H3C S5800 Switch Series in a 19-inch rack by using load-bearing mounting brackets,
as shown in
Figure 22 Install an S5800-60C-PWR switch in a 19-inch rack
Figure 23 Install an S5800-54S switch in a 19-inch rack
Figure 24 Install other models of the H3C S5800 Switch Series in a 19-inch rack
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and fix the switch to the rack with mounting brackets.
Table 30 Install an S5800-54S switch in the rack
Mounting bracket position
•
Rear mounting (near the
power modules)
•
Front mounting (near the
network ports)
CAUTION:
The depth of the rack for the S5800-54S switch must be 1000 mm (39.37 in).
Figure 22, Figure 23, and
Installing the
mounting brackets
See
mounting brackets
and chassis rails to
the switch
Figure 24.
Installing the chassis rails
and slide rails
Required.
"Attaching the
See "Attaching the mounting
brackets and chassis rails to the
switch
chassis."
the slide rails to the rack
34
chassis" and Attaching
Installing the
switch
See "Installing the
switch in the rack."