Hot Swappable Fan Trays - H3C S5800 Series Installation Manual

CAUTION:
The two power modules on an S5800-60C-PWR switch can be different types, but the switch does not
•
support the mix of a 300 W power module (PSR300-12A, PSR300-12A1, PSR300-12A2, PSR300-12D1,
or PSR300-12D2) and a 750 W power module (PSR750-A or PSR750-D) or the mix of a PSR750-A
power module and a PSR750-D power module. For more information, see
Ethernet Switch Hot Swappable Power Module Ordering Guide
Do not install a 650 W power module (LSVM1AC650 or LSVM1DC650) and a 300 W power module
•
(LSVM1AC300 or LSVM1DC300) on the same S5800-54S switch.
• In power redundancy mode, you can replace a power module without powering off the switch but must
strictly follow the installation and procedures in
damage to the switch.
Figure 19 Installation procedure
Figure 20 Removal procedure

Hot swappable fan trays

The S5800-60C-PWR, S5800-54S, and S5800-32F switches use hot swappable fan trays for heat
dissipation.
fan tray, see
Table 25 Fan tray specifications
Item
LSW1FAN (S5800-60C-PWR)
Fans
Fan speed
Max airflow
Input voltage
Total power consumption
Documentation reference
LSW1BFAN (S5800-32F)
Fans
Fan speed
Max airflow
Table 25 describes the fan trays available for these switches. For how to install or remove a
"Installing/Removing a fan
Specifications
•
Two 70 × 70 × 25.4 mm (2.76 × 2.76 × 1 in) fans
•
Four 40 × 40 × 28 mm (1.57 × 1.57 × 1.1 in) fans
•
70 × 70 × 25.4 mm (2.76 × 2.76 × 1 in) fans: 4700 R.P.M
•
40 × 40 × 28 mm (1.57 × 1.57 × 1.1 in) fans: 9500 R.P.M
150 cubic feet per minute (CFM)
12 V
15 W
H3C LSW1FAN & LSW1BFAN Installation Manual
1
5000 R.P.M
41.65 CFM
Figure 19 and
tray."
27
H3C S5800-60C-PWR
.
Figure 20 to avoid any bodily injury or