Rear panel
Figure 6 S5800-56C rear panel
(1) Bail latch
(3) Grounding screw
(5) AC-input power receptacle
NOTE:
The S5800-56C switch comes with the expansion interface card slot covered by a filler panel. In this
figure, an LSW1SP4P0 interface card is installed in the slot.
S5800-56C-PWR panel views
Front panel
Figure 7 S5800-56C-PWR front panel
(1) 10/100/1000Base-T auto-sensing Ethernet port
(3) Seven-segment LED
(6) Logo plate (A console port and a USB port are under this logo plate)
(7) System status LED (SYS)
(9) Interface card status LED (SLOT1)
(11) Port LED mode switching button
To use the console port and USB port, open the logo plate, as shown in
(2) RPS DC-input power receptacle
(4) Expansion interface card slot
(4) Port mode LED
9
(1)
(2)
(2) 10/100/1000Base-T Ethernet port LED
(5) SFP+ port LED
(8) RPS status LED (RPS)
(10) SFP+ port
Figure 4
and
(3) (4) (5)
(6)
(7)
(8)
(11) (10)
(9)
Figure
5.