Power Module Led; Rps Status Led - H3C S5800 Series Installation Manual

LED mark

Power module LED

Each power module slot has a status LED to show how the hot swappable power module in the slot is
operating.
Table 11 Power module status LED description
LED mark
PWR1
PWR2

RPS status LED

The RPS status LED shows the status of the RPS DC input.
Table 12 describes the RPS status LED behaviors for the S5800-32C and S5800-56C switches.
Table 13 describes the RPS status LED behaviors for the S5800-32C-PWR and S5800-56C-PWR
switches.
Table 12 S5800-32C and S5800-56C RPS status LED description
LED mark
RPS
Table 13 S5800-32C-PWR and S5800-56C-PWR RPS status LED description
LED mark
RPS
Status
Flashing yellow (1 Hz)
Off
Status Description
A power module is installed in power module slot 1, and the power output is
Steady green
normal.
A power module is installed in power module slot 1, but the power module has
Steady yellow
an output problem.
Off No power module is installed in power module slot 1, or no power is being input.
A power module is installed in power module slot 2, and the power output is
Steady green
normal.
A power module is installed in power module slot 2, but the power module has
Steady yellow
an output problem.
Off No power module is installed in power module slot 2, or no power is input.
Status Description
Both the RPS DC input and the AC input are normal, or an RPS is connected
Steady green
and the AC input is normal.
Steady yellow The RPS DC input is normal, but the AC input is disconnected or has failed.
Off No RPS is connected.
Status Description
Steady green Both the RPS DC input and the AC input are normal.
Steady yellow The RPS power input is normal, but the AC input is disconnected or has failed.
Off The RPS power input is abnormal or no RPS is connected.
Description
Some ports have failed to pass POST.
The switch is powered off.
20