Ports; Console Port; Management Ethernet Port; Usb Port - H3C S5800 Series Installation Manual

NOTE:
The S5800-32F switch comes with power module slot 1 empty and power module slot 2 covered by a filler
panel. You can install one or two power modules for the switch as needed. In this figure, two PSR150-A AC
power modules are installed in the slots.

Ports

Console port

Every S5800 switch has one console port.
Table 4 Console port specifications
Item
Connector type
Compliant standard
Transmission baud rate
Services

Management Ethernet port

The S5800-32F and S5800-54S switches have a management Ethernet port. You can connect this port
to a PC or management station for loading and debugging system software or remote management.
Table 5 Management Ethernet port specifications
Item
Connector type
Connector quantity
Port transmission rate
Transmission medium and max
transmission distance
Functions and services

USB port

Every S5800 switch has one OHC-compliant USB2.0 port that can upload and download data at a rate
up to 12 Mbps. You can use this USB port to access the file system on the Flash of the switch, for example,
to upload or download application and configuration files.
Specification
RJ-45
EIA/TIA-232
9600 bps (default) to 115200 bps
•
Provides connection to an ASCII terminal.
•
Provides connection to the serial port of a local or remote (through a pair of
modems) PC running terminal emulation program.
Specification
RJ-45
1
10/100/1000 Mbps, half/full duplex
100 m (328.08 ft) over category-5 twisted pair cable
Switch software and Boot ROM upgrade, network management
15