Connecting The Psr150-A/Psr150-A1 - H3C S5800 Series Installation Manual

Figure 61 Connect the S5800-56C/S5800-32C switch to a 12 VDC output RPS (I)
Figure 62 Connect the S5800-56C/S5800-32C switch to a 12 VDC output RPS (II)

Connecting the PSR150-A/PSR150-A1

1. Pull the bail latch leftwards (see
2. Connect one end of the AC power cord supplied with the power module to the power receptacle
on the power module (see callout 1 in
3. Pull the bail latch rightwards to secure the plug to the power receptacle (see callout 2 in
4. Connect the other end of the power cord to an AC power outlet.
Figure 63 Connect an AC power cord to the PSR150-A/PSR150-A1 (I)
Figure 63).
Figure 64).
59
Figure 64).