Installing the switch in a 19-inch rack
Installation methods
Table2-2 Installation methods
Switch models
SE-S5130-18S
SE-S5130-10S
Figure2-2 Front mounting brackets
(1) Screw hole for attaching the mounting bracket to the switch
(2) Screw hole for attaching the mounting bracket to the rack
Installation procedure at a glance
Figure2-3 Procedure for installing the switch in a 19-inch rack by using front mounting
brackets
Select an installation position for
将电源模块断电
将电源模块断电
将电源模块断电
the front mounting brackets
(near the port side)
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and then attach the switch to the rack by using the mounting brackets.
Mounting bracket type
Mounting bracket A (provided), as shown by
callout (A) in
Figure2-2
Mounting bracket B (provided), as shown by
callout (B) in
Figure2-2
Attach the front mounting
拆卸电源线
拆卸电源线
拆卸电源线
brackets to the switch
2-9
Installation procedure
See
"Rack-mounting the
switch by using front
mounting
brackets."
拆卸电源模块
拆卸电源模块
拆卸电源模块
Mount the switch in the rack