Transceiver module
SFP-GE-LH70-SM1550
SFP-GE-T
100 Mbps transceiver modules
SFP-FE-SX-MM1310-A
SFP-FE-LX-SM1310-A
SFP-FE-LH40-SM1310
SFP-FE-LH80-SM1550
NOTE:
To guarantee the functionality of the SFP ports, use only H3C SFP transceiver modules on the H3C
•
S5800 Switch Series.
The SFP transceiver modules available for this switch series are subject to change over time. For the most
•
up-to-date list of SFP transceiver modules, consult your H3C sales representative or technical support
engineer.
For the SFP transceiver module specifications, see
•
SFP+ port
Every S5800 switch (except the S5800-60C-PWR) has fixed SFP+ ports, and you can plug the SFP+
transceiver modules, SFP transceiver modules, and SFP+ cables in
You can use the SFP+ ports as IRF physical ports to connect S5800 switches in an IRF deployment.
Table 8 SFP+ transceiver modules and cables available for the H3C S5800 Switch Series
Transceiver
module/cable
1000 Mbps SFP transceiver modules
SFP-GE-SX-MM850-A
SFP-GE-LX-SM1310-A
SFP-GE-LH40-SM1310
SFP-GE-LH40-SM1550
Central
Connector
wavelength
1550 nm
LC
N/A
RJ-45
1310 nm
LC
1310 nm
LC
1310 nm
LC
1550 nm
LC
Central
Connector
wavelength
850 nm
LC
1310 nm
LC
1310 nm
LC
1550 nm
LC
17
Fiber
9/125 μm single mode
optical fiber
Category-5 twisted pair
62.5/125 μm
multimode optical fiber
9/125 μm single mode
optical fiber
9/125 μm single mode
optical fiber
9/125 μm single mode
optical fiber
H3C Transceiver Modules User Guide
Table 8
into the SFP ports as needed.
Fiber
•
50/125 μm
multimode
optical fiber
•
62.5/125 μm
multimode
optical fiber
9/125 μm single
mode optical fiber
9/125 μm single
mode optical fiber
9/125 μm single
mode optical fiber
Max transmission
distance
70 km (43.50 miles)
100 m (328.08 ft)
2 km (1.24 miles)
15 km (9.32 miles)
40 km (24.86 miles)
80 km (49.71 miles)
.
Max transmission
distance
•
550 m (1804.46 ft)
over 50/125 μm
fiber
•
275 m (902.23 ft)
over 62.5/125 μm
fiber
10 km (6.21 miles)
40 km (24.86 miles)
40 km (24.86 miles)