Hot Swappable Fan Trays - H3C S5800-32F Installation Manual

Model
PSR750-D
Do not plug a 300 W power module and a 750 W power module on the same S5800-60C-PWR switch.
You can use one power module for the S5800 series to ensure normal operation of the whole system.
You can also use two power modules in parallel connection to implement 1 + 1 redundancy.
Note that you can replace a power module with the device running. However, you need to follow the
installation and removal procedures illustrated in
damage to the device and personal injury.
Figure 1-16 Installation procedure
Install the Install the
power module power module
Figure 1-17 Removal procedure
Switch off the Switch off the
power module power module
For the detailed characteristics and specifications of the S5800 series power modules, refer to H3C
PSR150-A & PSR150-D Power Modules User Manual, H3C PSR300-12A & PSR300-12D1 Power
Modules User Manual, and H3C PSR750-A & PSR750-D Power Module User Manual.

Hot Swappable Fan Trays

The S5800-60C-PWR and S5800-32F adopt hot swappable fan trays.
specifications of the two models of fan trays.
Item
Rated voltage range
Max voltage range
Output voltage
Max output current
Max output power
Connect the Connect the
power cord power cord
Disconnect the Disconnect the
power cord power cord
Specifications
–48 VDC to –60 VDC
–40.5 VDC to –72 VDC
Dual outputs, 12 V and
–52 V respectively
25 A for 12 V output
voltage
32 A for –52 V output
voltage
1800 W
Figure 1-16 and Figure 1-17
Switch on the Switch on the
power module power module
Remove the Remove the
power module power module
1-25
Device model
S5800-60C-PWR
respectively to prevent
Table 1-23 shows the