System Setting; General - EverFocus EZN Series User Manual

5.7

System Setting

5.7.1

General

You can configure the system general settings on this page.
System Time: Set up a system date and time.
Date Format: Select a format for the date.
Time Format: Select a format for the time.
【DST Setting】Select DST and then configure the below settings. The DST (Daylight Saving Time) function allows
you to select the amount of time that Daylight Saving has increased by in your particular time zone or region.
Daylight Saving Time: Switch the button to the right to enable the DST function.
DST Mode: Select Week or Date to configure the start/end time below.
Week: Select a month, a particular day and time when Daylight Saving starts and ends. For example, 2am on
the first Sunday of a particular month.
Date: Select the start date (click the calendar icon), end date and time when Daylight Saving starts and ends.
Time Offset: Select the amount of time that Daylight Saving has increased by in your time zone. This refers to
the difference in minutes, between Coordinated Universal Time (UTC) and the local time.
Start Time: Select a start time for the DST to start.
End Time: Select an end time for the DST to stop.
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
44