Audio - EverFocus EZN Series User Manual

5.2.4

Audio

You can configure the audio settings on this page.
Enable Audio: Switch the button to the right to enable audio configuration.
Note: If you want to enable the Audio function, after configuring the Audio configuration on this page,
please turn on the Audio function on the Video Streaming page (please refer to 5.5.2 Video Streaming).
Output Volume: Select an audio output volume (0~10).
Input Volume: Select an audio input volume (0~10).
Audio Type: Select an audio codec.
Click Refresh to refresh the page; click Apply to save the settings.
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
24