Network Setting; Network - EverFocus EZN Series User Manual

5.5

Network Setting

5.5.1

Network

You can configure the network settings on this page.
Type: Select a network type.
DHCP: This setting lets the system use an automatically assigned (dynamic) IP address. This address can
•
change under certain circumstances. For instance, when the camera's network switch/hub has to be
rebooted. Do not assign to the DHCP server the same IP addresses used for the other network cameras
and PCs with unique IP addresses.
PPPoE: This is a DSL-connection application. The ISP will ask the user to input a username and password.
•
Contact your ISP for these details.
Static IP: The user can manually set the Static IP address. This type of address is stable and cannot change,
•
but the user has to make sure there are no address conflicts with other network-connected devices.
Client Port: The Client port can be used to send information through (e.g. using the mobile
app). If the default port 9988 is already taken by other applications, please change it.
IP Address: The IP address of the IP Camera. The IP address consists of four groups of numbers, separated by
periods. For example, "192.168.001.100".
Subnet Mask: Subnet mask is a network parameter which defines a range of IP addresses that can be used on a
network. The subnet address also consists of four groups of numbers, separated by periods. For example,
"255.255.000.000".
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
32